DynaVap, battery free vaporizer kit, Dynavap The
  • SKU: VDK-100.b
  • Availability: in stock Many in stock Out of stock You can purchase this product but it's out of stock

Dynavap The "M" Starter Pack (2019 model)

$120.00
10% Credit Back
DESCRIPTION

PRODUCT DESCRIPTION

The “M” Starter Pack offers everything a new VapCap user needs. Featuring The 2019 “M” which is crafted from medical grade stainless steel and is the perfect introduction to DynaVap’s VapCaps. 

This package also includes a Cyclone (Triple Torch) lighter which provides optimal heating results along with a Cedar or Walnut DynaStash. The DynaStash includes a VapCap garage, extra storage compartment and an integrated DynaMag. The DynaMag will secure your DynaStash to any magnetic surface, help remove a hot cap and hold any VapCap at attention. The DynaWax will help extend the life of the O-rings and when it comes time to clean your VapCap. The Pipe Cleaners are perfect for removing any buildup. This kit comes with every replacement part one would need for the “M”.

The “M” (2019 model) // DynaStash: Cedar or Walnut** // Cyclone Triple Torch Lighter // Cotton Pipe Cleaners- hard bristle (5 pack) // DynaWax // 3 High Temp O-rings // 2 Condenser O-rings // 1 Replacement Part: Stainless Steel CCD

*Note lighter in this kit can be substituted with lighter of our choice at any time when the Cyclone is unavailable 

**Note alternative DynaStashes may be used due to product availability at time of order fulfillment.

***"M" comes packaged a complimentary tube to protect it during transit. Color may vary***

****No substitutions****

Design

Dynavap "M" Battery Free Vaporizer

Our latest DynaVap ‘M’ is deployed for use straight from the VapLab with the intent of providing the highest quality, durability and experience for an extremely reasonable price. The 'M' is constructed from medical grade stainless steel to the exact dimensions of the original VapCap 'M'. The quality of our newest addition remains consistent with our entire line of products with an additional robust durability. Alike all VapCaps, the 'M' arrives equipped with our signature temperature indicating cap providing simplicity and efficiency for all.

**Vapcap comes packaged in complimentary storage tube to protect during transit**

How-to-Use the Dynavap "M"

How To Use the DynaVap "M" Vaporizer

To use your VapCap:

  • Most Important! Before your first use, please read all these instructions and then do at least two, preferably more than two, dry runs with nothing in the VapCap! This is very important to become familiar with the operation of the unit and prevent unintentional combustion residues.

 

  • The VapCap is unlike any other vaporizer, so give it a few tries empty to get the feel of its unique temperature-indicating click. Heat the VapCap in a quiet area, listen and feel so you know what you are looking for. If you are using a torch lighter, this should not take more than 5 or 6 seconds. Heat the middle of the cap not the end and rotate while heating. If more than 6 seconds go by and you don’t hear the click, stop heating and let it cool down.

 

  • If you severely overheat your VapCap it can be permanently damaged. It is very important you hear the cool down click, or allow it to cool to the touch, before heating for the next cycle. Repeat this procedure several times to get the feel of how this little unit operates.

 

  • When you are ready for the first use, let it cool down, then remove the cap from the VapCap.

 

  • Fill the VapCap chamber with your material of choice. This can be done easily by pushing the VapCap into a container of your material and twisting. Pre-grinding your material is NOT needed like when using a bat or hitter. If you prefer to grind, go coarse. Finely ground material will get through the diffuser disc and into the unit.

 

  • Place the cap back on the VapCap.

 

  • Heat up the metal cap of your VapCap while rotating it, with the flame or heat source applied to the last third of the metal cap. Try to only apply heat to the side of the cap and NOT the end. This is not like lighting a smoking device.

 

  • Continue rotating and heating the cap until you hear and or feel a click - this means the VapCap is ready!

 

  • Puff on the mouthpiece. Experiment a little here. If you draw with the air hole completely plugged the flow will seem somewhat restricted. This is normal. Some find they get the best result by taking a long, slow steady draw with the hole completely open, and others will intermittently or lightly cover the air/vapor mix port. The way air flows through the VapCap cools the vapor to provide a smooth experience.

 

  • Keep drawing as desired until you hear the click again, this means the VapCap has cooled down.

 

  • When the vapor production diminishes, it is easy to reactivate. a. Make sure the VapCap has re-clicked “to cool” before reheating for the next cycle. b. If you are not sure if it has re-clicked, gently blow on the end to cool it. It may take up to 1 minute to reset.

 

  • When there is no longer any desirable vapor produced, and the cap has clicked “to cool”, remove the cap. The consumed material can be either blown out the end, or the little tang on the cap is also a wonderful “digger outer.”

 

  • Reload for another round of simple and wonderful vapor.

Tips:

  • It is recommended that you use a butane torch style lighter with your VapCap.
  • Wait until you hear or feel the reset click or at least 30 seconds after the VapCap stops producing vapor to reheat.
  • It is VERY important to wait until you hear the cool down click before applying more heat.
  • Stop heating your VapCap as soon as you hear the click until you get to know each other better.
  • You can vary the intensity of the flavor by using the air/vapor adjustment port.
  • Depending on your personal preference and heat source, as well as how many cycles since the VapCap was loaded, you may want to apply heat for 1-2 seconds after the click. This will provide for a different level of roasted flavor.
  • DO NOT APPLY HEAT FOR MORE THAN 3 SECONDS PAST THE CLICK! OVERHEATING WILL PERMANENTLY DAMAGE THE VAPCAP!
  • The end of the VapCap gets very hot during and following use. Do not touch the hot end until it has cooled. Also please do not put the hot end into your mouth.
  • The VapCap can be safely put back in its Special Case or reloaded after the cool down click is heard.

 

Dimensions

Dimensions

92mm

Cleaning and Maintenance

 Maintenance

Cleaning instructions:

To remove consumed material from the chamber, either blow on the mouthpiece or use the built in extractor or “digger outer” to empty the chamber. The body can be cleaned with hot water. You can also use the included carrying case with almost any cleaning solution filled half full then shake or soak to wash your VapCap with the cap removed.

 

WARNING: Cleaning with alcohol or other flammable liquids is not recommended. Alcohol will not damage any component of the VapCap, even with prolonged soaking, but we do not recommend using it.

Compatibility Chart

ADDITIONAL INFORMATION
Color: Blue, Purple, White
Size: 20, 24
Material: 100% Polyester
REVIEWS
BACK TO TOP