Selecting the right down stem, bowl, or bong attachment

by Sagelow on September 16, 2019

Bong downstem helps to remove smoke from the bowl heading off to the pipe repository. Bong downstem acts as a way of controlling your bong smoke and help in refining the smoke to meet the highest standards. A bong downstem is a safer way to inhale smoke because they offer smooth, clean, and light smoke.

There are numerous bong downstem items accessible nowadays. You can even purchase your downstem from online stores. But you must take the necessary precautions when it comes to selecting the downstem of your choice.

Presently, there are three fundamental kinds of downstem to choose from, the metal, the glass, and the bong diffuser.

Another significant element that you should consider is the "size" of the downstem. You should be comfortable with the bong downstem sizes if you need to find the ideal companion for your pipe. Based on your bong or bubbler joint, you may need to choose between a 14 mm downstem and an 18 mm downstem.

When it comes to measuring the proper downstem, there are techniques that you should follow.


Measure the inner chamber of your bong

Place a pencil (or any similar object) into the opening of the female ground joint until it is about ½ inch from the base. Monitor the point where the object comes out of the joint.


Measure the object

Use a ruler or measuring tape to decide the length from the point to the embedded part of the object. The identified number is the approximate ground joint to base measurement, which is likewise the length of the recommended downstem. Ensure that your preferred downstem is no longer than this estimation. If its longer, it will put a lot of weight on itself.


Measure the joint

Utilize a similar measuring instrument to decide the width of the female joint. Joint sizes of most popular bongs arrive in a basic 10, 14, and 18 millimeters with 14 and 18 being the most widely recognized. Those who lack measuring tools can take a dime and check whether it fits inside the opening. If it sits perfectly inside the opening, then its 18mm. If it doesnt fit perfectly then, it can either be a 14mm or 10mm. You need to ensure that the preferable joint is exactly one of these sizes. Larger joints clearly won't fit, and smaller joint won't make the airtight seal you need.


Choose a new downstem

Taking your measurements into consideration, you can easily buy a unique downstem. When you buy from online headshops, you can easily find your desired length and width. The downstem you choose is also based on the kind of male bowl you intend to utilize. Glass bowls are like joints, and they come in 10, 14 and 18mm, so you must ensure your new downstem suits your bowl. Downstems have a single joint for the bowl and another to link with the pipe. Downstems come in 14mm to 14mm, 18mm to 18mm, 14mm to 18mm and 18 to 14mm.


14mm to 14mm Diffused Downstem - Samurai Blaze - DankStop - Best Headshop for Smoking Accessories

Sold out

Sold out

Sold out

Sold out

Sold out
18mm to 14mm Vertical Cut Downstem - Samurai Blaze - DankStop - Best Headshop for Smoking Accessories

Sold out

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00

Shipping Address

Shipping Methods